Anthurium Papillilaminum Care (Ultimate Guide)

This post may contain affiliate links

Anthurium Papillilaminum care is really not that hard, but as usual, we’ve created an extensive guide for you just to be sure and cover all the small details, so you can tackle with any potential issue with this beautiful plant. Anthurium Papillilaminum is also known as the Velvet Leaf Anthurium Because of its unique texture.

We love Anthurium species for their beautiful houseplants. We recommend Anthurium Papallilaminum if you are looking for rare plants of the same species that can also be used as houseplants.

This combination of tropical plants and other species creates a cheerful, bright atmosphere in any garden. Anthurium is a rare and beautiful tropical plant.

Papillilaminum, unlike many other anthurium types, is a terrestrial plant and not an epiphyte. It grows from the ground and not on trees.

This hybrid is native to Central America, especially Panama. This hybrid thrives in warm and humid environments.

It’s worth noting, however, that there are a few hybrids available as well.

  • Anthurium papillilaminum x magnificum
  • Anthurium papillilaminum and warocqueanum
  • Anthurium papillilaminum x crystallinum

Despite this, the plant’s most striking feature is its large, long leaves.

Young leaves have a burgundy hue at first. As they age, however, the leaves turn darker green and more leathery. They also have more white veins.

Care for Anthurium Papillilaminum Indoors, the Anthurium Papillilaminum requires medium to bright indirect lighting. Provide partial shade outdoors.

It thrives in humid, warm environments. To avoid overwatering, make sure you use well-draining soil.

Anthurium Papillilaminum Origins

My friends, a beautiful tropical plant has a fascinating history. Elaine Spear collected the plant from Panama. Dr. Thomas B. Croat was the botanist and curator of the Missouri  Botanical Gardens, 1983 in St. Louis.

Botanists have named this lovely species Anthurium Papallilaminum Croat. The information indicates that the stalks and leaves stand straight and can support 13.4 inches of leaves.

Anthurium Papillilaminum carePin

It is the subterete stalk that is smaller than round that is most fascinating. The leaves are darker in color and less leathery, with a dark olive-green hue. They can also be colored red or purple. The Geniculum also allows the leaves to point towards the light, which gives them a purple-red color.

It has velvety leaves, just like other Anthurium plants, Anthurium Magnificum. The veins are not whitish and start at the first basal vein but don’t surround the leaf. Inflorescences are also used for reproduction.

The stem supports an inflorescence you can call a stalk. When in bloom, it has both male and female parts. Spathe is not a type of flower, but a modified form of a leaf. Strange, isn’t it?

You will notice two seeds in berries when they are pollinated and grown outdoors. You also notice a greenish-purple-red color on the twine, which turns black as the spadix remains yellow to green.

Anthurium Papillilaminum Care

Light

Anthurium Papillilaminum thrives in indirect, bright light. It can tolerate low light, but not too much, and will grow well in moderate light. The plant likes to be outdoors in partial shade or semishade.

Its natural habitat is Central and South America, where it lives under the forest canopy as a terrestrial plant. The strong sun is absorbed most effectively by the plants and trees that are larger.

Its terrestrial nature also means it grows differently from other Anthurium types. Many anthuriums can be classified as epiphytes. They can climb and grow on trees. The Anthurium Papillilaminum, on the other hand, grows on the ground and is upright.

The plant cannot be exposed to direct sunlight due to its forest biome location. The leaves will be burned if they are exposed to too much sunlight or intense light.

It is best to keep it out of direct sunlight. If you wish to give it a southern exposure, either distance it from the opening of the window or filter the light that comes in through the window.

Temperature

Anthurium Papillilaminum can attain an ideal temperature between 70 and 90 degrees Fahrenheit. It is well-suited for USDA Hardiness Zones 9b through 11. This is because of where it comes.

It is native to the tropical regions of South and Central America. It is a good choice for warm, sunny weather throughout the year.

These areas don’t see snow or freeze in winter. The plant is therefore tolerant to cold. It should be kept away from places with temperatures below 60 degrees Fahrenheit. Although it might be able tolerate these temperatures, it will begin to slow down in this environment.

The lower the temperature, the more problems it will face. What does all this mean? This means that indoors, the plant should be kept away from cold drafts such as open windows or air conditioners.

Outdoors, ensure that you bring your outdoor gear indoors once it gets colder in the fall. The plant will die if it is left outside during winter.

Humidity

Another feature of tropical weather is the humidity. The Anthurium Papillilaminum can tolerate humidity levels between 70% and 80%. This environment will allow it to grow faster and produce more lush leaves.

See also  Polka Dot Plant Propagation (Ultimate Guide)

Despite this, the plant can tolerate humidity levels up to 50%. It is important to ensure that your plant has enough moisture. The average humidity in most homes is between 20% and 50%, depending on the season.

It will let you know if it doesn’t. It will start to notice its leaves turning brown and crispy at the tips and edges. This indicates that the plant needs more humidity.

To make it easier to see the humidity levels on any given day, I keep a hygrometer close to my plants. This allows me to quickly glance at the humidity and determine if I need to help specific plants.

You can use the following methods to raise humidity around your plant if you live in dry areas or an area where humidity can drop (a common problem in winter).

  • A humidifier is a must-have
  • It can be moved to the bathroom
  • It can be grouped with other plants
  • Place it on top of rocks and in a tray with water.
  • Mist the plant
  • Every couple of weeks, give the plant a bath.

How Often Do You Water Anthurium Papillilaminum?

Moderate watering is required for the Anthurium Papillilaminum. It needs to be watered on average once per week. Depending on the heat, it may be necessary to water it 2-3x per week during summer.

It is important to reduce watering in winter and let the soil dry out between waterings. This will avoid wet soil and excessive watering. This means that you will likely only water your Anthurium Papillilaminum every 2-3 weeks.

Please note that the above watering frequency guidelines are only guidelines. This is because soil drying time depends on many factors, including the amount of sun that your plants get, how hot or cool they are, humidity, what kind of soil you use, and how much water you give them.

It is my opinion that watering plants accurately requires checking the soil before you add water. This will tell you how dry or moist the soil is before you add more. This will help you avoid overwatering.

Simply stick your finger in the soil to test it. Wait 2 days to test again if the soil is still wet or slightly moist. The soil is still moist so don’t water it. Overwatering the plant will eventually lead to it becoming dry.

Instead wait until the soil’s top 2 inches are completely dry before adding water.

Anthurium Papillilaminum potting soil

Anthhurium Papillilaminum requires a moist, well-draining and fertile soil that has a pH of 6.1 to 6.5. Because it helps with aeration, it is a good idea also to use chunky soil. This type of soil can be obtained by purchasing an Aroid Mix.

Aroid mixtures are made for Anthuriums as well as other Aroids such Philodenderons and Monsteras. They are able to drain excess moisture very well, keeping roots well-oxygenated. This will protect your Anthurium Papillilaminum from root rot and overwatering.

You can make your own soil if you prefer to buy ready-made stuff.

I love to mix and match:

This will provide the plant with the nutrients it needs. It also ensures that the soil is well-hydrated to prevent the roots from becoming too dry. It is important to not only use the correct potting soil but also to make sure that the pot has drainage holes at its bottom.

So the water that drains from the soil doesn’t pool in the bottom of the pot, it will stay there. If this happens, the soil will remain wet. Drainage holes allow the liquid to quickly drain and drip down, allowing the soil to stay drier.

Fertilizer

Another important aspect to caring for your Anthurium Papillilaminum is fertilizer. You can ensure that your plant gets enough nutrients to grow quickly and produce lush, healthy foliage by feeding it.

Avoid over-fertilizing your plants. This is something that I see many new houseplant owners doing in the hope that more fertilizer will help their plants grow faster. This may work in the short-term, but it can quickly lead to problems.

Fertilizer contains mineral salts. These salts transport nutrients efficiently to the roots of the plant so they can absorb them. Once the roots absorb the nutrients, the water evaporates, fertilizer salts build up in the soil.

It is important to not apply too much fertilizer every time. To avoid overfeeding the plant. The Anthurium Papillilaminum needs fertilizer only once a month during the growing season. You can use a balanced liquid fertilizer that has been diluted to a quarter strength.

You don’t have to use a high phosphorous blend because the Anthurium Papillilaminum doesn’t produce flowers.

Do not apply too much fertilizer to the roots.

Pruning

With proper care, the Anthurium Papillilaminum may grow to 3 feet in height. Its large, hanging leaves are the most important feature of the Anthurium Papillilaminum. You’ll notice them bending outwards from the long, thin stems. They are stunning to behold.

The plant can grow quickly, but you don’t need to prune it as the leaves make up the majority of the overall plant. You will probably only have to take out one or two leaves at a time. You should not do more, as each large leaf can leave a gap that can quickly make Anthurium Papillilaminum appear sparser.

See also  Propagating Monstera Without Node (Is it possible?)

To help your plant grow faster, get rid of any yellow, brown, diseased, or damaged foliage.

How to Propagate Anthurium Papillilaminum

Stem cuttings and division are the best ways to propagate Anthurium Papillilaminum. Stem cuttings can be easier because you don’t have to unpot the plant. You can also grow multiple plants simultaneously by simply getting more stem cuttings.

If you don’t want the new plant to grow, division is more efficient. Instead, you can get a semi-grown plant right after propagation. It also allows you to reduce the size of your mother plant. It is a great option if you need to reduce its size.

Stem Cuttings are used to propagate Anthurium Papillilaminum

  • Start by selecting healthy stems that have 2-3 leaves. You can take additional stem cuttings if you wish to grow more than one plant. Be careful not to take too many stem cuttings that leave the mother plant without any leaves. Remember that plants require foliage to photosynthesize.
  • After you have made your choice, use a pair of sterilized scissors or pruning shears to cut the stem. A stem should be at least 6 inches in length.
  • Next, prepare the pot and fill it up with a fresh, draining potting mix.
  • Dip or coat the stem cutting’s cut end with the rooting hormone. Powder or paste form are both options.
  • The stem can be planted by cutting a hole in the soil with your finger and then inserting the cut end of the stem into the soil. To keep the cutting in place, you can pat the soil down.
  • Water the soil until it is completely moist.
  • Place it towards a direct, bright light.

How to Transplant or Repot Anthurium Papillilaminum

Repotting the Anthurium Papillilaminum is only necessary every 2 to 3 years. It is not a fast-growing plant, so you won’t have to rush. To determine when it is time to repot your plant, the most important sign is to inspect the bottom of the pot.

You’ll notice a lot of roots emerging from the drainage hole underneath the container once the plant is root-bound. This indicates that the plant needs more space. Retaining it will allow it to have more space.

Repotting should be done in a container 2 inches larger than the existing pot. Replace the potting soil with a well-draining, new mix. Repotting signals the plant that it can grow larger by giving it a signal.

If you are happy with the current plant size and don’t want it any larger, you can trim the roots instead of repotting. This will allow you to reduce the size of your root ball so it can fit into the new pot. You also limit the plant’s growth.

Are Humans, Cats, and Dogs At Risk from Anthurium Papillilaminum?

Yes. The Anthurium Papillilaminum can be toxic. It contains calcium oxalate crystals.

The crystals can only be activated if you eat a portion of the plant. It is important to not let pets, children, or animals eat the stems or leaves.

Share the image below on your Pinterest board if you find this article on Anthurium Papillilaminum care helpful!

Anthurium Papillilaminum CarePin

 

Anthurium Papillilaminum Potential Problems and Solutions

Pests

The Anthurium Papalaminum is just like any other houseplant, you must be vigilant for pests. The chances of pest problems in your plant are lower if you take proper care and clean it regularly.

However, spider mites are the most common pests that attack this plant. They can also be attacked by mealybugs and scale. All of these are sap suckers. They will eat the plant’s internal juices when they eat it. These insects are more destructive as they multiply in numbers.

Regular inspection and proper cleaning are therefore essential. You can treat any pests with insecticidal soap and neem oils if you find them. It could take up to three applications depending on the extent of the infestation to eradicate them.

It is important to catch it early.

 

Diseases

Root rot is the most severe of all diseases. You should be aware of how much and how often your water is being drank. Also, ensure that the soil you use drains well. It can lead to waterlogging, even if you water properly.

These problems can be prevented by ensuring drainage holes are available. Leaf infections are another thing to watch out for.

It is usually moisture that causes problems. Leaves that are not dried quickly enough can become infected by fungal and bacterial infections. Avoid wetting the leaves with water when watering the plant. Avoid getting them wet later in the day when there isn’t any sun.

To remove excess moisture, you can also use a towel to pat the leaves down.

Also, avoid misting the plants too often.

Leave a Comment

1
Share to...